PoE Injector 16 Port
Artikelnummer: 108051

PoE Injector 16 Port

Artikelnummer: 108051
sofort verfügbar

Lieferzeit: 3 - 5 Tage

786,71 €

inkl. 19% USt., zzgl. Versand

Versorgt bis zu 16 PoE fähigen Netzwerkkameras zuverlässig mit Strom.
 
Produktdetails anzeigen
  • - HighPower PoE Injector liefert 15.4W
  • - Versorgt alle PoE fähigen Netzwerkkameras zuverlässig mit Strom.
  • - Einfach mit Ihrem Switch verbinden
Technische Daten:

Anwendungen

IP Telephones; Wireless Network Access PointsLighting Systems with Single UPS; Security Systems

FEATURES

Fully Compliant with IEEE802.3af10/100/1000 base T compatible
Full Power of 370-15,4W per port; Cisco Legacy detectionFull Protection OTP, OCP, OVP; 48V RPS Input (optional)

SAFETY

Isolation TestPrimary to Secondary: 4242VDC for 1min. 10mA, Primary to F.G.: 2121VDC for 1 minute Output to F.G.: 2121VDC for 1 minute
Insulation ResistancePrimary to secondary: >10M OHM 500 VDC, Primary to F.G.: >10M OHM 500 VDC

INPUT

AC Input Voltage Range90 to 264 VAC
Leakage Current3.5 mA max @ 254 VAC 60 Hz
AC Input Frequency47-63 Hz
AC Inrush Current30A(RMS) max. for 115VAC/ 60A(RMS) max. for 230VAC
AC Input Current5.5A for 90VAC / 2.75A for 240VAC

GENERAL

Efficiency75% (typical) at max. load and 120VAC 60Hz
Hold-up Time16mS min. 120VAC and max. load
Transient O/P Voltage Protection60V max. at switch on and off at any AC line Phase
Turn-On Delay Time3 sec max. at max. load, and 120VAC 60Hz, 25Hz
USB Diagnostics PortUSB ?B? port for diagnostics & manual port control Windows GUI
RegulationFunctional requirements of IEEE802.3af

EMC

Conducted & radiated EmissionEN55022 Class A, FCC Class A with UTP Cabling EN55022 Class B, FCC Class B with FTP Cabling
Immunity EN50082-1ESD EN61000-4-2. Level 3 RS EN61000-4-3. Level 2 EFT EN61000-4-4. Level 2 Surge EN61000-4-5. Level 3 CS EN61000-4-6. Level 2 Voltage Dips EN61000-4-11 Harmonic EN61000-3-2 Class A

ENVIRONMENTAL

TemperatureOperation 0 to +40°C, Non-operation -25 to +65°C
HumidityOperation 5 to 90%