**5% Rabatt auf LUPUS Artikel - ab 250€ - Kuponcode: LUPUS5**
1 Kanal PoE Injector
Art.Nr.: 10808
sofort verfügbar

Lieferzeit: 1 - 3 Tage**

59,90 €

inkl. USt.*, versandfreie Lieferung

Versorgt alle PoE fähigen Netzwerkkameras zuverlässig mit Strom.
Produktdetails anzeigen
  • - HighPower PoE Injector liefert 15.4W
  • - Versorgt alle PoE fähigen Netzwerkkameras zuverlässig mit Strom.
  • - Einfach mit Ihrem Switch verbinden
Technische Daten:


Security Camera with Pan/ Tilt/ ZoomIP Print Servers


Fully Compliant with IEEE802.3af10/100/1000 base T compatible; Full ProtectionOCP, OVP
Full Power of 15.4W per portCisco AP1250 Full Power Support; rack mount possible
Cisco: no extern parts required for Legacy devices:VoIP Phones (7910, 7912, 7940, 7960) Access points (350, 1100, 1200)


Isolation TestPrimary to Secondary: 4242VDC for 1min. 10mA, Primary to F.G.: 2121VDC for 1 minute, Output to F.G.: 2121VDC for 1 minute
Insulation ResistancePrimary to secondary: >10M OHM 500 VDC, Primary to F.G.: >10M OHM 500 VDC


DC Output56V @ 15.4W per port
RegulationFunctional requirements of IEEE802.3af


AC Input Voltage Range90 to 264 VAC
Leakage Current3.5 mA max @ 254 VAC 60 Hz
AC Input Frequency47-63 Hz
AC Inrush Current30A(RMS) max. for 115VAC/ 60A(RMS) max. for 230VAC
AC Input Current2.5A for 90VAC / 1.3A for 240VAC


Effi ciency75% (typical) at max. load and 120VAC 60Hz
Hold-up Time16mS min. 120VAC and max. load
Transient O/P Voltage Protection60V max. at switch on and off at any AC line Phase
Turn-On Delay Time3 sec max. at max. load, and 120VAC 60Hz, 25Hz
RegulationFunctional requirements of IEEE802.3af


Conducted & radiated EmissionEN55022 Class A, FCC Class A with UTP Cabling EN55022 Class B, FCC Class B with FTP Cabling
Immunity EN50082-1ESD EN61000-4-2. Level 3 RS EN61000-4-3. Level 2 EFT EN61000-4-4. Level 2 Surge EN61000-4-5. Level 3 CS EN61000-4-6. Level 2 Voltage Dips EN61000-4-11 Harmonic EN61000-3-2 Class A


TemperatureOperation 0 to +40°C, Non-operation -25 to +65°C
HumidityOperation 5 to 90%